This Fx splits a single incoming signal into three bands to produce three outputs.
The real use of this is when combined with other effects. For instance you may wish to compress different bands by different degrees. If so, split the signal using this, feed each output into a compressor and set the degree of compression, then recombine the outputs.
NOTE - requires a VST Host that allows network connection of input and outputs
The band split frequencies are settable and the frequency response is displayed in the user interface.
In this case the bands are split at 250Hz and 1500Hz.
1: low band
2: mid band
3: high band
|MIDI I/P 'program' supported?||Yes|
|MIDI I/P 'control'?||No|